Page Setup Dialog Box Page Setup Dialog BoxThe Page Setup dialog box contains settings for the printed page, such as the size of the print media, and resizing the printed image.
Select the size of the paper for the print job. To enter the size manually, select Custom 1 - Custom 3 and click Custom....
Select this check box when printing on banner paper.
The image is printed on the entire paper surface, so that no margins are left on the four sides of the paper. The media types available for Borderless Printing are PR-101, GP-301/GP-301N, PP-101 and MP-101. For all other media types, the print quality may decrease.
When you select Borderless Printing, the sections that extend beyond the paper are not printed because the image is enlarged to a size slightly larger than the paper size.
You can use the slide bar to adjust how much the image extends beyond the paper. It is recommended that you normally set the slide bar to the right end. If you move the slide bar to the left to reduce the extension amount, a border may appear.
Specify the scaling percentage to resize the document for printing.
Select landscape or portrait printing.
To specify a custom paper size, click this button to open the Custom dialog box after selecting Custom 1 to Custom 3 in the Paper Size popup menu. The Custom dialog box allows you to specify the length and width of the paper.
Click to open the Printer Utility dialog box for maintenance operations such as print head cleaning and nozzle check pattern printing, as well as for changing the print mode.
Saves the settings specified in the Page Setup dialog box.
 |
