Loading

 Load the paper with the whiter side facing up.

 A maximum of 10 sheets can be loaded at once.

 Set the paper thickness lever to the left.

 Printer Driver Settings

 MediaType: Matte Photo Paper

 Page Size: Ensure the setting matches the size set in the application.

 Handling of Printed Output

 Remove each sheet as soon as it is printed.

 Colors may slightly change if papers are stacked up before the ink is completely dry. It is recommended that you allow the ink to dry for 24 hours.

 Do not attempt to dry the ink with a hair dryer or by exposing printed sheets to direct sunlight.

 Storing Printed Output

 Do not store or display printouts in hot, damp or humid conditions.
Never expose them to heat or direct sunlight.

 Store printouts in photo albums, photo frames or presentation binders to protect them from direct exposure to air or sunlight.

 Do not mount printouts in an adhesive-type album, as you may not be able to remove them.

 Be aware that some types of plastic folders and albums may cause the edges of the paper to turn yellow.

 Printable Area

See Printing Area

Note

When you use Borderless Printing, create the data by using the same size as the paper size, and paste the data so that it fills the editing screen without leaving any margins. If you are using an application that allows you to set margins, set the left, right, top and bottom margins to 0 mm. For instructions on setting margins, refer to the user's manual for your application.